Using a Web Service 9-13
Specifying the scan command from a computer (Web
Service)
A computer can send the scan command to this machine, then receive the
scan data.
As an example, the procedure for scanning from the Windows Photo Gallery
is described below.
" The scan command can also be sent from this machine, where the
data will be saved. For details, refer to “With [Web Service Settings]”
on page 10-31.
Specifying the scan command from a computer
1 Start up the application used for scanning.
2 In the “File” menu, click “From Scanner or Camera”.
3 From the “Select Device” list, select this machine, and then click [OK].
The New Scan window appears.
4 Position the document on this machine.
– Specify the scan settings, and then click [Scan].
Scanning begins, and the scan data is added to the list of image files.
To Next Page
Loading...
