Specifying destinations10-30
" If [Admin Settings] - [Security Settings] - [Security Details] - [Manual
Destination Input] is set to [Restrict], an address cannot be directly
typed in. For details on [Manual Destination Input], refer to “[Security
Settings]” on page 3-70.
With [WebDAV]
1 In the initial Scan to Folder mode screen, press [Direct Input].
2 Press [WebDAV].
3 Specify settings for [Host Name], [File Path], [User Name] and [Password]
for the destination computer.
4 If necessary, specify settings for other parameters in the [Details] screen.
– [Port No.]: Type in the port number. (Range: 1 to 65535)
– [Proxy]: Select whether or not a proxy server is used.
– [SSL Setting]: Select whether or not SSL is used.
5 Press [OK].
" To specify multiple destinations, specify the various settings, press
[Next Dest.], and then specify the settings for the next WebDAV desti-
nation.
" If [Admin Settings] - [Security Settings] - [Security Details] - [Manual
Destination Input] is set to [Restrict], an address cannot be directly
typed in. For details on [Manual Destination Input], refer to “[Security
Settings]” on page 3-70.
With [USB Memory]
1 Plug the USB memory device into the USB HOST port.
2 In the initial Scan to Folder mode screen, press [Direct Input].
3 Press [USB Memory].
" If a USB memory device has not already been plugged in, [USB Mem-
ory] is not available.
4 Specify a setting for [Document Name].
5 Press [OK].
" If [Admin Settings] - [Security Settings] - [Security Details] - [Manual
Destination Input] is set to [Restrict], an address cannot be directly
typed in. For details on [Manual Destination Input], refer to “[Security
Settings]” on page 3-70.
To Next Page
Loading...
