Copy programs8-4
Copying using stored settings (copy programs)
1 In the home screen, press [Copy].
2 Place the document on the original glass or load it into the ADF.
" For details on positioning the document, refer to “Placing a document
on the original glass” on page 4-36 and “Loading a document into the
ADF” on page 4-37.
3 Press the [Mode Memory] key.
The copy programs screen appear.
4 Select the copy program to be recalled.
5 Press [Detail].
The settings screen appears.
6 Check the copy settings stored with the selected copy program.
7 Press [Close].
8 Press [OK].
The initial Copy mode screen appears again.
9 Press the [Start (Color)] key or the [Start (B&W)] key.
To Next Page
Loading...
Need help?
General
