Olivetti d-COLORMF3000 - When [Advanced Mode] Is Selected

Windows TWAIN Driver Settings9-4
" If the [Rotate back side] check box is selected, the back side of the
image is rotated 180° and scanned. (Applies only if [ADF (2-sided)] is
selected.)
 [Image size]
Shows the data size of the scan image.
 [Close]
Click to close the TWAIN driver window.
 [Prescan]
Click to begin scanning a preview image.
 [Scan]
Click to begin scanning.
 [Clear] icon
Click to erase the preview image.
When [Advanced Mode] is selected
The following parameters can be set when [Advanced Mode] is selected.
 [Load]
Specify a saved settings file (dat file) for scanning.
 [Save]
Save the current settings as a settings file (dat file).
 [Default]
Return all settings to their defaults.
 [Help icon]
Click to display the Help.
 [About icon]
Click to display the software version information.
 [Paper source]
Specify the paper source.
With scanning documents from the ADF, select whether to scan only the front
side or both sides of the document.
 [Original Size]
Specify the original size.
 [Scan Type]
Specify the scan type.