Logging in to this machine 15-7
If an authentication failure recurs, the problem may be due to incorrect
registration of IC card information. Register IC card information again.
When [Card Authentication] is specified for [Authentication Type], a regis-
tered user is authenticated by simply placing the IC card. When [Card
Authentication + Password] is specified, a registered user is authenticated
by placing the IC card and entering the password.
Press [User Name] and [Password] to log in by entering the user name
and the password, without using the authentication device.
When [Card Authentication] is enabled
1 Press [Card Authentication].
" When using the ID & Print function with IC card authentication, select
[Begin Printing] or [Access Basic Screen] as necessary. For details on
the ID & Print function, refer to “ID & Print” on page 6-4.
2 Place the IC card on the authentication device.
When [Card Authentication + Password] is enabled
1 Press [Card Authentication].
" When using the ID & Print function with IC card authentication, select
[Begin Printing] or [Access Basic Screen] as necessary. For details on
the ID & Print function, refer to “ID & Print” on page 6-4.
2 Place the IC card on the authentication device.
3 Press [Password] and enter the password.
4 Press [Login].
To Next Page
Loading...
Need help?
General
