Replacing Consumables11-10
Replacing a Imaging Unit
When replacing a imaging unit, refer to the following table. For optimum print
quality and performance, use only approved imaging units for your specific
machine type, as listed in the table below. You can find your machine type
and the imaging unit part numbers on the consumables reorder label inside
the front cover your machine.
Do not touch the OPC drum
surface. This could lower image
quality.
If the messages [Replace Imaging Unit] appear, replace the specified imaging
unit. As an example, the procedure for replacing the black imaging unit is
described below.
1 Check the message window to see which color imaging unit needs replac-
ing.
To Next Page
Loading...
Need help?
General
