Performing Scan to Folder mode operations10-22
[Original Settings]- [Orig. Binding Position]
Specify the binding position when scanning a double-sided document using
the ADF. The orientation of the back sides of the pages differs depending on
whether the double-sided document will be bound at the top or at the left.
[Color Mode]
Select whether the document will be scanned in color or black and white.
" [Black] may not be available, depending on the setting selected for
[File Type].
Item Description
[Left Bind] Select this setting to specify a binding position at
the left.
[Top Bind] Select this setting to specify a binding position at
the top.
[Auto] Select this setting to automatically specify the
binding position.
If the document length is 297 mm (11.69 inches)
or less, a binding position along the long side of
the paper is selected.
If the document length is more than 297 mm
(11.69 inches), a binding position along the short
side of the paper is selected.
Item Description
[Color] [ON] Select this setting to automatically detect the
color of the document and scan it with the cor-
responding setting.
[OFF] Select this setting to scan in full color.
[Mono-
chrome]
[GrayScale] Select this setting for documents with many
halftones, such as in black-and-white photos.
[Black] Select this setting for documents with distinct
black and white areas, such as in line drawings.
To Next Page
Loading...
