Media Storage 4-33
Media Storage
Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored for a long time out of its packaging may dry up
too much and cause misfeeding.
If media has been removed from its wrapper, place it in its original pack-
aging and store in a cool, dark place on a level surface.
Avoid moisture, excessive humidity, direct sunlight, excessive heat, and
dust
Store paper in a location with a temperature between 0 °C and 30 °C and
humidity between 30% and 85%.
Avoid leaning against other objects or placing it in an upright position.
Before using stored media, do a trial print and check print quality.
To Next Page
Loading...
