Interrupting a copy job8-2
Interrupting a copy job
The current jobs can be temporarily interrupted so a document can be copied
with different copy settings.
This is convenient for quickly making a copy.
" The [Interrupt] key cannot be pressed while a document is being
scanned.
" When the [Interrupt] key is pressed, the copy settings return to their
defaults.
1 In the home screen, press [Copy].
2 Place the document on the original glass or load it into the ADF.
" For details on positioning the document, refer to “Placing a document
on the original glass” on page 4-36 and “Loading a document into the
ADF” on page 4-37.
3 Press the [Interrupt] key.
The indicator on the [Interrupt] key lights up in green, and printing of the
current job stops.
4 Specify the copy settings.
5 To make a color copy, press the [Start (Color)] key.
To make a black-and-white copy, press the [Start (B&W)] key.
6 After the interrupting job has finished printing, press the [Interrupt] key.
The indicator on the [Interrupt] key goes off, and Interrupt mode is can-
celed.
Printing of the job that was interrupted continues.
To Next Page
Loading...
