Using the Postscript, PCL and XPS Printer Driver5-6
Using the Postscript, PCL and XPS Printer
Driver
Common Buttons
The buttons described below appear on each tab.
[OK]
Click to exit the Properties dialog box, saving any changes made.
[Cancel]
Click to exit the Properties dialog box without saving any changes made.
[Apply]
Click to save all changes without exiting the Properties dialog box.
[Help]
Click to view the help.
[Favorite Setting]
This allows the current settings to be saved. To save the current settings,
specify the desired settings, and then click [Add]. Specify the settings
described below, and then click [OK].
îš„ [Name]: Type in the name of the settings to be saved.
îš„ [Icon]: Select an icon from the icon list to easily identify the settings.
The selected icon appears in the drop-down list.
îš„ [Sharing]: Specify whether or not the settings to be saved can be used by
other users logged onto the computer.
îš„ [Comment]: Add a simple comment to the settings to be saved.
Afterward, the saved settings can be selected from the drop-down list. To
change the registered setting, click [Edit].
In addition, predefined settings can be selected.
The predefined settings are those for [2 in 1], [Photo] and [Gray Scale].
Select [Default Setting] from the drop-down list to reset the functions in all
tabs to their default values.
To Next Page
Loading...
Need help?
General
