[Admin Settings]3-42
[Daylight Saving Time] Specify settings for daylight saving time.
[Enable] Settings [ON] / [OFF]
Select whether or not the machine’s internal
clock observes daylight saving time.
If [ON] is selected, the specified time offset
from the current time appears.
[Offset] Settings 1 to 150 (Default: 60)
Specify the length of time applied for daylight
saving time between 1 and 150 minutes (in
1-minute increments).
[List/Counter] The machine settings can be printed.
[Job Settings List] Settings [Print] / [Cancel]
Prints the list of machine settings.
[Report Input Tray] Settings [Tray 1] / [Tray 2] / [Tray 3] / [Tray
4]
Select the paper tray loaded with the paper
used to print reports.
[Auto Reset Settings] Specify settings to automatically reset copy
settings after the specified time period has
lapsed.
[Enable] Settings [ON] / [OFF]
Select whether or not to reset after the speci-
fied time period has lapsed.
[Auto Reset] Settings 1 to 9 (Default: 1)
Specify the time required to reset.
[Priority Mode] Settings [Home] / [Copy] / [E-mail] / [Folder]
/ [Fax]
Select the function to be displayed on the
screen after resetting.
To Next Page
Loading...
Need help?
General
