Olympus IPLEX YS - Checking the Angulation Functions

46
Chapter 4 Basic operations
 Checking the angulation functions
1 Pull 2 meters of the insertion tube out of the drum and straighten it
out.
2 Manipulate the [ANGLE/LOCK ] joystick slowly and ensure that the
angulation section moves smoothly.
CAUTION
• Repair is required if the joystick shaft is bent or if the knob comes off. Contact Olympus.
NOTE
• The angulation movement is interlocked with the direction the [ANGLE/LOCK ] joystick is
moved, the bend locks when you release the [ANGLE/LOCK ] joystick.