54
Chapter 4 Basic operations
4.5 Adjusting the image
Still image (freeze)
CAUTION
• Do not insert and withdraw the insertion tube when the image is frozen.
1 Press the [FRZ/REC] button on the back of the remote controller to
freeze the observed image. The LCD monitor displays the freeze
indicator ( ) on the top right of the screen.
NOTE
• If the [FRZ/REC] button is held depressed for more than 2 seconds, image recording will be
initiated.
2 When the observation image is frozen, press the [FRZ/REC] button
on the remote control again or the [LIVE/GAIN] button to return to a
live image.
3 When an image containing quick action is frozen, the frozen image
may be blurred. Further, when the “NOISE REDUCTION” setting
(page 73) is “HIGH”, ghosting is more likely to appear. Change the
setting to “STANDARD” to reduce ghosting.
To Next Page
Loading...
