62
Chapter 4 Basic operations
Recording audio with still images
1 Connect the microphone to the microphone connector. Use a
microphone that is recommended by Olympus.
Contact Olympus for information about microphones.
2 In the “RECORD” menu, set STILL AUDIO to “ON” (see page 74).
3 Press the [FRZ/REC] button for at least two seconds while the
frozen image is displayed.
The still audio recording confirmation window appears after completion of still
image recording.
4 To record audio, select “YES” and press the [MEAS/ENTER]
joystick.
Audio recording starts.
The screen shows “AUDIO” during recording. The audio is recorded for 60
seconds.
MICROPHONE
To Next Page
Loading...
