89
Chapter 5 Menu operations and functions
Changing the selection of the optical adapter
Change the optical adapter settings if you change the optical adapter on the
distal end of the insertion tube.
1 Press the [MENU/EXIT] button to display the main menu.
2 Select “ADAPTER” and press the [MEAS/ENTER] joystick.
The optical adapter list is displayed.
This list shows all the optical adapters, including registered stereo optical
adapters and other optical adapters.
3 Select the optical adapter that is currently connected from the list
of optical adapters and press the [MEAS/ENTER] joystick. If a
stereo optical adapter is attached, select the correct set number for
the stereo optical adapter that is currently attached.
To Next Page
Loading...
