50
Chapter 4 Basic operations
4.3 Withdrawing the insertion tube
WARNING
• The distal end of the insertion tube becomes hot just after use in high-temperature
atmospheres. Do not touch it directly to avoid burns.
CAUTION
• Do not withdraw the insertion tube while your finger is on the [ANGLE/LOCK ] joystick.
Otherwise, the insertion tube and/or observation target may be damaged.
• If the insertion tube is caught by something during withdrawal, turn the remote control gently
while continuing the withdrawal. Do not use excessive force to avoid damaging the insertion
tube or the object you are inspecting.
Releasing the angulation lock
Press the [CENT] button on the remote control and then pull the distal end
straight out.
[CENT] button
To Next Page
Loading...
