57
Chapter 4 Basic operations
3 Contrast correction with the [BRT/MARK] button
Press the [BRT/MARK] button on the remote control while a frozen or retrieved
image is displayed to adjust the contrast to 5 levels.
If the contrast is adjusted to level "0", the contrast of the image displayed is not
adjusted. If the contrast is adjusted to level "1" or "2", the contrast of the image
increases.
If the contrast is adjusted to level "-1" or "-2", the contrast of the image
decreases. When the contrast is adjusted, the contrast level adjustment appears
on screen for about 3 seconds.
To Next Page
Loading...
