Omni 7000 Series Installation Guide

OMNI 4000/7000 Installation Guide – Rev H
4-41
Configuration
4.
If you are connected to a proxy server, you
must select the Enabled checkbox and
complete the fields.
5.
Click OK when you have changed
preferences.
4.7.4 Connect to the Flow Computer
To connect the OMNICONNECT software to the flow computer, follow these instructions:
1.
Click the Online button in the Home
ribbon to see the Connect to OMNI
window.
2.
In the Connect to OMNI window, choose
which unit to connect with from the list
presented.
Double click or click to highlight and click
Connect.
3.
In the Password window, select the
Administrator user from the drop-down
list, or User 00. The default factory
password is omni in lowercase letters.
Click OK.
Contact the network administrator
for proxy information.
These are the sites and units you
previously created in Section 4.7.2
Setup Sites .
If you already changed your
password and set up users, then
enter your own password.

Omni 7000 Series Specifications

General

Brand	Omni
Model	7000 Series
Category	Desktop
Language	English