Omni 7000 Series - Configure a Printer

OMNI 4000/7000 Installation Guide – Rev H
4-73
Configuration
5.
When you have finished with the screen,
click Apply to save the changes.
6.
Continue to move down and configure all
the items listed under Prover in the
Configure tree by repeating Steps 3
through 5, as necessary.
4.10.8 Configure a Printer
To configure a local RS-232 serial printer or Ethernet network printer, follow the applicable set of
instructions.
Serial Local Printer
1.
Select the Local Printers function in the
Configure tree in the left panel to display
its configuration settings in the screen on
the right.
2.
Fill in the information in the fields for a
Local Printer screen, as necessary.
3.
When you have finished with the screen,
click Apply to save the changes.
4.
Repeat for additional Local Printer
screens.
Press F1 to access
OMNICONNECT Help for
assistance.