Omni 7000 Series Installation Guide

OMNI 4000/7000 Installation Guide – Rev H
4-4
Configuration
4.1.2 User Logon
Flow computers are shipped with one default front panel ID and PIN, which gives the
Administrator full access to all functions and configuration items. The User Logon screen displays
when editing any data.
To log on, follow these instructions:
1.
From the Home screen, press Log In.
2.
On the User Logon screen, enter the
default User ID: 00 using the numeric
keypad.
3.
Enter the default User Pin: 0000
4.
Press OK.
This will send you back to the Home
screen. Your User ID will show in the top
right.
5.
Use the default Administrator User ID and
Pin until OMNICONNECT is installed and
activated on your system, and users have
been created (Section 4.8 Security Setup)
When editing any data:
• The User ID and PIN remains active for 15 minutes.
• After 15 minutes, the User ID and PIN time out and need to be re-entered to
continue editing data.
• This default timeout can be modified after OMNICONNECT is installed
and activated.

Omni 7000 Series Specifications

General

Brand	Omni
Model	7000 Series
Category	Desktop
Language	English