OMNI 4000/7000 Installation Guide – Rev H
4.10.6 Configure Products
Liquids
To configure liquid products if your flow computer is configured for liquid applications, follow these
instructions:
Select Products in the Configure tree in
the left panel and expand the item to see
the entire list of products.
a. Select a product in the tree to
display its configuration options in the
screens on the right.
b. Fill in the information in the
screens for all three tabs, as
necessary.
c. When you are finished, click
Apply to save the changes.
Continue selecting each product as you
move down the Configure tree to
configure its settings, as needed.
For liquid applications, there are up
to 32 configurable products. You do
not have to use or configure all of
them.
Press F1 to access
OMNICONNECT Help for
assistance.