539
Specifications of Basic I/O Units Appendix A
CJ1W-ID201 12 to 24-V DC Input Unit (Terminal Block, 8 Points)
Circuit Configuration
Rated Input Voltage 12 to 24 V DC
Rated Input Voltage Range 10.2 to 26.4 V DC
Input Impedance 2.4 kΩ
Input Current 10 mA typical (at 24 V DC)
ON Voltage/ON Current 8.8 V DC min./3 mA min.
OFF Voltage/OFF Current 3 V DC max./1 mA max.
ON Response Time 8.0 ms max. (Possible to set to between 0 and
32 ms in the PLC Setup.)
OFF Response Time 8.0 ms max. (Possible to set to between 0 and
32 ms using PLC Setup)
Number of Circuits 8 (each common)
Number of Simultaneously ON
Points
100% simultaneously ON
Insulation Resistance 20 MΩ between external terminals and the GR ter-
minal (100 V DC)
Dielectric Strength 1,000 V AC between the external terminals and the
GR terminal for 1 minute at a leakage current of
10 mA max.
Internal Current Consumption 5 V DC: 80 mA max.
Weight 110 g max.
560 Ω
COM7
IN07
2.4 kΩ
1000pF
560 Ω
COM0
IN00
2.4 kΩ
1000 pF
Input indicator
Internal circuits
Input indicator
Internal circuits
to
To Next Page
Loading...
