8 Operation
8 - 18
OMNUC G5-series (Pulse-train Input Type) AC Servomotors and Servo Drives User’s Manual
Note The encoder temperature value appears only when an incremental encoder is used.
Do not set.
Accumulative Operation Time
Automatic Motor Recognition Function
Drive Temperature and Encoder Temperature
Reserved
Accumulative Operation Time [h] is displayed.
Lower (L)
Higher (H)
Press to switch Lower (L) and Higher (H).
Automatic Recognition Enabled
Automatic Recognition Disabled
Press to switch the desired monitor.
The temperature [°C] is displayed.
To Next Page
Loading...
