4-52 HS-360X Handheld DPM Scanner User Manual
Page Options
Page Options
To select a page option, select one of the programming symbols below.
Page Mode
Parameter # 1364
• Page State - In this mode, the cradle sends a page state request to each scanner. It
remains in Page State indication until every scanner sends an acknowledgment.
The scanner enters Page State when the LED indicator is blinking blue and the vibrating
motor and beeper are activated. When the trigger is pressed, or the scanner is inserted
into the cradle, or the requested timeout (default is 30 seconds) is reached, the scanner
sends the acknowledgment to the cradle and returns to its normal state.
• Page Simple - In this mode, the cradle sends a page indication request to each scanner,
and returns to idle state. Each scanner issues a single Page State indication.
Page State
(1)
* Page Simple
(0)
To Next Page
Loading...
Need help?
General
