HS-360X Handheld DPM Scanner User Manual 6-3
Imaging Preferences
Scanning Sequence Examples
In most cases scanning one programming symbol sets the parameter value. For example,
to disable image capture illumination, scan the Disable Image Capture Illumination
programming symbol under Image Capture Illumination. The scanner issues a fast
“warble” beep and the LED turns green, signifying a successful parameter entry.
Other parameters require scanning several programming symbols. See these parameter
descriptions for this procedure.
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan
the correct parameter.
Imaging Preferences Parameter Defaults
The table below lists the defaults for imaging preferences parameters. To change the
default values, scan the appropriate programming symbols in this guide. These new values
replace the standard default values in memory.
See
Appendix A — Standard Default Parameters
for all user preferences, hosts, symbologies,
and default parameters.
Parameter Parameter Number Default
Imaging Preferences
Image Size (Number of Pixels) 302 Full Resolution
JPEG Image Options 299 JPEG Quality Selector
JPEG File Size 561 160 kb
JPEG Quality and Size Value 305 65
Image File Format 304 JPEG
To Next Page
Loading...
Need help?
General
