Omron HS-360X - Handheld Trigger Mode

5-24 HS-360X Handheld DPM Scanner User Manual
User Preferences
Handheld Trigger Mode
Parameter # 138
Select one of the following trigger modes for the scanner.
• Standard (Level) - A trigger pull activates decode processing. Decode processing
continues until the barcode decodes, you release the trigger, or the Decode Session
Timeout occurs.
• Presentation (Blink) - The scanner activates decode processing when it detects a
barcode in its field of view. After a period of non-use, the scanner enters a low power
mode, in which the LEDs turn off until the scanner senses motion.
The scanner uses an internal dim illumination state when it enters low power mode until
motion is detected.
* Level (Standard)
(0)
Presentation (Blink)
(7)