HS-360X Handheld DPM Scanner User Manual 9-69
Symbologies
Set Lengths for Interleaved 2 of 5
Parameter # L1 = 22, L2 = 23
The length of a code refers to the number of characters (i.e., human readable characters),
including check digit(s) the code contains. Set lengths for I 2 of 5 to any length, one or two
discrete lengths, or lengths within a specific range. The range for Interleaved 2 of 5
lengths is 0 - 55. The default is 6 to 55.
• One Discrete Length - Select this option to decode only I 2 of 5 symbols containing a
selected length. Select the length using the numeric programming symbols in
Appendix H — Numeric Keyboard. For example, to decode only I 2 of 5 symbols with
14 characters, scan I 2 of 5 - One Discrete Length, then scan 1 followed by 4.
• Two Discrete Lengths - Select this option to decode only I 2 of 5 symbols containing
either of two selected lengths. Select lengths using the numeric programming symbols
in Appendix H — Numeric Keyboard. For example, to decode only I 2 of 5 symbols
containing either 2 or 14 characters, select I 2 of 5 - Two Discrete Lengths, then scan
0, 2, 1, and then 4.
• Length Within Range - Select this option to decode an I 2 of 5 symbol with a specific
length range. Select lengths using numeric programming symbols in Appendix H —
Numeric Keyboard. For example, to decode I 2 of 5 symbols containing between 4
and 12 characters, first scan I 2 of 5 - Length Within Range. Then scan 0, 4, 1, and 2
(enter a leading zero for single digit numbers).
• Any Length - Scan this option to decode I 2 of 5 symbols containing any number of
characters within the scanner’s capability.
Note: Due to the construction of the I 2 of 5 symbology, it is possible for a scan covering
only a portion of the code to transmit as a complete scan, yielding less data than is
encoded in the barcode. To prevent this, select specific lengths (I 2 of 5 - One Discrete
Length, Two Discrete Lengths) for I 2 of 5 applications.
I 2 of 5 - One Discrete Length
I 2 of 5 - Two Discrete Lengths
To Next Page
Loading...
