Omron HS-360X - Inserting Batteries

1-12 HS-360X Handheld DPM Scanner User Manual
HS-360X Wireless Handheld DPM Scanner
Inserting Batteries
To insert batteries in the battery charger, angle the battery with the contacts facing up and
slide the contact side of the battery under the LED indicator ledge as shown below. Push
down on the label surface of the battery until it clicks in place, engaging the contacts in the
battery charger.
Lanyard
Do not attach the tool balancer to the lanyard slot at the bottom of the device.
To install the optional lanyard:
1. Insert the loop on the lanyard into the slot at the bottom of the device handle.
Inserting
Batteries
Insert Lanyard Loop