9-52 HS-360X Handheld DPM Scanner User Manual
Code 39
Set Lengths for Code 39
Parameter # L1 = 18, L2 = 19
The length of a code refers to the number of characters (i.e., human readable characters),
including check digit(s) the code contains. Set lengths for Code 39 to any length, one or
two discrete lengths, or lengths within a specific range. If Code 39 Full ASCII is enabled,
Length Within a Range or Any Length are the preferred options. The default is 1 to 55.
When setting lengths for different barcode types, enter a leading zero for single digit numbers.
• One Discrete Length - Select this option to decode only Code 39 symbols containing a
selected length. Select the length using the numeric programming symbols in
Appendix H — Numeric Keyboard. For example, to decode only Code 39 symbols
with 14 characters, scan Code 39 - One Discrete Length, then scan 1 followed by 4.
• Two Discrete Lengths - Select this option to decode only Code 39 symbols containing
either of two selected lengths. Select lengths using the numeric programming symbols
in Appendix H — Numeric Keyboard. For example, to decode only Code 39 symbols
containing either 2 or 14 characters, select Code 39 - Two Discrete Lengths, then scan
0, 2, 1, and then 4.
• Length Within Range - Select this option to decode a Code 39 symbol with a specific
length range. Select lengths using numeric programming symbols in Appendix H —
Numeric Keyboard. For example, to decode Code 39 symbols containing between 4
and 12 characters, first scan Code 39 - Length Within Range. Then scan 0, 4, 1, and 2
(enter a leading zero for single digit numbers).
• Any Length - Select this option to decode Code 39 symbols containing any number of
characters within the scanner’s capability.
Code 39 - One Discrete Length
Code 39 - Two Discrete Lengths
Code 39 - Length Within Range
To Next Page
Loading...
