Omron HS-360X - Variable Pin Code

4-56 HS-360X Handheld DPM Scanner User Manual
Bluetooth Security
Variable PIN Code
Parameter # 608
When switching to Cradle Host mode with authentication enabled, scan Static PIN Code
below to avoid entering the PIN code manually. The PIN stored in memory is used. Scan the
Variable PIN Code below to manually enter a PIN code with each connection.
The default PIN code is the user-programmed PIN set and stored above. Typically, however,
HID connections require entering a Variable PIN Code. If, when attempting connection, the
application presents a text box that includes a PIN, scan the Variable PIN Code programming
symbol, then re-attempt connection. When you hear a beep indicating the scanner is waiting
for an alphanumeric entry, enter the provided variable PIN using the Alphanumeric Programming
Barcodes, then scan End of Message. if the code is less than 16 characters. The scanner
discards
the variable PIN code after connection.
* Static PIN Code
(0)
Variable PIN Code
(1)