HS-360X Handheld DPM Scanner User Manual 9-43
Symbologies
ISBT Concatenation Redundancy
Parameter # 223
If you set ISBT Concatenation to Autodiscriminate, use this parameter to set the number
of times the scanner must decode an ISBT symbol before determining that there is no
additional symbol.
Scan the programming symbol below, then scan two numeric programming symbols in
Appendix H — Numeric Keyboard to set a value between 2 and 20. Enter a leading zero
for single digit numbers.
ISBT Concatenation Redundancy
To Next Page
Loading...
