HS-360X Handheld DPM Scanner User Manual 4-3
Radio Communications
Radio Communications Parameter Defaults
The table below lists the defaults for radio communication parameters. If you wish to change
any option, scan the appropriate programming symbol(s) provided in the Radio Communications
Parameters section.
See
Appendix A — Standard Default Parameters
for all user preferences, hosts, symbologies,
and default parameters.
In this guide, the parameter numbers listed are the same as the attribute numbers for these
parameters.
See Appendix B — Country Codes for Country Keyboard Types (Country Codes).
Parameter Parameter Number
1
Default
Radio Communications Host
Types
383 Cradle Host
BT Friendly Name 607 n/a
Discoverable Mode 610 General
Wi-Fi Friendly Mode 1299 Disable
Wi-Fi Friendly Channel Exclusion 1297 Use All Channels
Radio Output Power 1324 High
Link Supervision Timeout 1698 5 Seconds
Bluetooth Radio State 1354 On
Bluetooth HID - Wait for
Connection
1714 Disable
HID Features for Apple iOS 1114 Disable
HID Keyboard Keystroke Delay N/A No Delay (0 msec)
CAPS Lock Override N/A Disable
Ignore Unknown Characters N/A
Send Barcodes with Unknown
Characters
Emulate Keypad N/A Enable
Fast HID Keyboard 1361 Enable
Quick Keypad Emulation 1362 Enable
Keyboard FN1 Substitution N/A Disable
Function Key Mapping N/A Disable
Simulated Caps Lock N/A Disable
Convert Case N/A No Case Conversion
Reconnect Attempt Beep
Feedback
559 Disable
Reconnect Attempt Interval 558 30 Seconds
Auto-reconnect 604 Auto-reconnect Immediately
Beep on Insertion 288 Enable
1. Parameter number decimal values are used for programming via RSM commands.
To Next Page
Loading...
