HS-360X Handheld DPM Scanner User Manual 5-31
User Preferences and Miscellaneous Options
Timeout Between Decodes
Parameter # 144
Use this option in presentation mode to control the time the scanner is inactive between
decoding different symbols. It is programmable in 0.1 second increments from 0.1 to 9.9
seconds. The default is 0.1 seconds.
To select the timeout between decodes for different symbols, scan the programming
symbol below, then scan two numeric programming symbols from Appendix H —
Numeric Keyboard that correspond to the desired interval, in 0.1 second increments.
Timeout Between Decodes
cannot be greater than or equal to the
Decode Session Timeout
.
Timeout Between Decodes
To Next Page
Loading...
