4-34 HS-360X Handheld DPM Scanner User Manual
Out-of-Range Indicator
Out-of-Range Indicator
An out-of-range indicator can be set by scanning
Beep On Reconnect Attempt
and extending
the time using the Reconnect Attempt Interval.
For example, with Beep on Reconnect Attempt disabled while the scanner loses radio
connection when it is taken out of range, the scanner attempts to reconnect silently during
the time interval set by scanning a Reconnect Attempt Interval.
When Beep on Reconnect Attempt is enabled, the scanner emits 5 high beeps every 5
seconds while the re-connection attempt is in progress. If the Reconnect Attempt Interval is
adjusted to a longer period of time, such as 30 minutes, the scanner emits 5 high beeps
every 5 seconds for 30 minutes providing an out-of-range indicator.
To Next Page
Loading...
