HS-360X Handheld DPM Scanner User Manual 9-141
Symbologies
Security Level
Parameter # 77
The scanner offers four levels of decode security for delta barcodes, which include the
Code 128 family, UPC/EAN, and Code 93. Select increasing levels of security for decreasing
levels of barcode quality. There is an inverse relationship between security and scanner
aggressiveness, so choose only that level of security necessary for any given application.
• Security Level 0: This setting allows the scanner to operate in its most aggressive
state, while providing sufficient security in decoding most “in-spec” barcodes.
• Security Level 1: This default setting eliminates most misdecodes.
• Security Level 2: Select this option if Security level 1 fails to eliminate misdecodes.
• Security Level 3: If you selected Security Level 2 and misdecodes still occur, select this
security level. Be advised, selecting this option is an extreme measure against mis-decoding
severely out-of-spec barcodes. Selecting this level of security significantly impairs the
decoding ability of the scanner. If you need this level of security, try to improve the quality
of the barcodes.
Security Level 0
(0)
* Security Level 1
(1)
Security Level 2
(2)
To Next Page
Loading...
