HS-360X Handheld DPM Scanner User Manual 9-81
Symbologies
Set Lengths for Codabar
Parameter # L1 = 24, L2 = 25
The length of a code refers to the number of characters (i.e., human readable characters),
including check digit(s) the code contains. Set lengths for Codabar to any length, one or
two discrete lengths, or lengths within a specific range. The default is 4 to 55.
• One Discrete Length - Select this option to decode only Codabar symbols containing a
selected length. Select the length using the numeric programming symbols in
Appendix H — Numeric Keyboard. For example, to decode only Codabar symbols
with 14 characters, scan Codabar - One Discrete Length, then scan 1 followed by 4.
• Two Discrete Lengths - Select this option to decode only Codabar symbols containing
either of two selected lengths. Select lengths using the numeric programming symbols
in Appendix H — Numeric Keyboard. For example, to decode only Codabar symbols
containing either 2 or 14 characters, select Codabar - Two Discrete Lengths, then
scan 0, 2, 1, and then 4.
• Length Within Range - Select this option to decode a Codabar symbol with a specific
length range. Select lengths using numeric programming symbols in Appendix H —
Numeric Keyboard. For example, to decode Codabar symbols containing between 4
and 12 characters, first scan Codabar - Length Within Range. Then scan 0, 4, 1, and 2
(enter a leading zero for single digit numbers).
• Any Length - Scan this option to decode Codabar symbols containing any number of
characters within the scanner’s capability.
Codabar - One Discrete Length
Codabar - Two Discrete Lengths
To Next Page
Loading...
Need help?
General
