HS-360X Handheld DPM Scanner User Manual 5-51
User Preferences and Miscellaneous Options
UID Error Mode Options
Parameter # 742
• UID Error Beep (default): Scan UID Error Beep to program the scanner not
to parse the data contained in the UID when the
UID is not formatted correctly. An error tone
sounds and no data transmits to the host.
• UID Error Pass Data: Scan UID Error Pass Data to program the scanner
to transmit data to the host even when parsing
fails. The scanner reads the incorrectly encoded
UID, assumes the host can process the data and
transmits the unformatted contents of the barcode.
No error tone sounds.
• UID Error Beep and Pass Data: Scan UID Error Pass Data to program the scanner
to transmit data to the host even when parsing
fails. The scanner reads the incorrectly encoded
UID, assumes the host can process the data and
transmits the unformatted contents of the barcode.
An error tone sounds.
Scan the appropriate programming symbol below to program potential error conditions.
* UID Error Beep
(0)
UID Error Pass Data
(1)
To Next Page
Loading...
