Omron HS-360X - Time Delay to Low Power Mode

5-18 HS-360X Handheld DPM Scanner User Manual
User Preferences
Time Delay to Low Power Mode
Parameter # 146
This parameter only applies when Lower Power Mode is enabled.
This parameter sets the time it takes the scanner to enter Low Power Mode after any
scanning activity. Scan the appropriate programming symbol below to set the time. The
HS-360X Wired Scanner default is 1 Hour. The HS-360X Wireless Scanner default is 100 msec.
100 msec
(65)
500 msec
(69)
1 Second
(17)
2 sec
(18)