8-16 HS-360X Handheld DPM Scanner User Manual
RS-232 Parameter Defaults
Host Serial Response Timeout
This parameter specifies how long the scanner waits for an ACK, NAK, or CTS before
determining that a transmission error occurred. This only applies when in one of the ACK/NAK
software handshaking modes, or RTS/CTS hardware handshaking mode.
* Minimum: 2 Seconds
Low: 2.5 Seconds
Medium: 5 Seconds
High: 7.5 Seconds
Maximum: 9.9 Seconds
To Next Page
Loading...
Need help?
General
