HS-360X Handheld DPM Scanner User Manual 4-11
Radio Communications
Wi-Fi Friendly Mode
Parameter # 1299
Scanners configured for Wi-Fi friendly mode behave as follows:
• The scanner remains in sniff mode, and exits sniff mode only during firmware update.
• If any Wi-Fi channel is excluded from the hopping sequence, AFH turns off.
• Scanner (and cradle) avoid the selected Wi-Fi channels after establishing connection.
Notes
• If using this feature, configure all scanners in the area for Wi-Fi friendly mode.
• By default, no Wi-Fi channels are excluded.
• Since Bluetooth requires a minimum of 20 channels when Wi-Fi channels 1, 6, and 11
are excluded,
a smaller number of channels are cut from the hopping sequence.
• Updating Wi-Fi friendly settings before Bluetooth connection is recommended.
Scan a programming symbol below to enable or disable Wi-Fi Friendly Mode.
* Disable Wi-Fi Friendly Mode
(0)
Enable Wi-Fi Friendly Mode
(1)
To Next Page
Loading...
