HS-360X Handheld DPM Scanner User Manual 1-7
Quick Start
Supplying Power to the Cradle
The cradle receives power from one of two sources:
• An external power supply.
• When connected to the host through an interface cable that supplies power.
The cradle detects whether the host or the external supply is supplying power. It always
draws power from the external supply when available, regardless of the presence of power
from a host.
Mounting the Cradle
For information on mounting the cradle, refer to the documentation included with the cradle.
Wireless HS-360X Battery
Battery Statistics Capabilities
The HS-360X Wireless Scanner is equipped with PowerPrecision+ batteries. These
intelligent batteries have the integrated technology required to collect the detailed real-time
battery metrics needed to maximize useful battery life and ensure every battery is healthy
and able to hold a full charge.
PowerPrecison+ batteries support the following remote management functionality:
• Battery Asset Information
• Manufacture Date of Battery
• Serial Number of Battery
• Model Number of Battery
• Firmware Version of Battery
• Design Capacity
• Battery Life Statistics
• State of Health Meter
• Charge Cycles Consumed
• Battery Status (at Time of Poll)
• State of Charge
• Remaining Capacity
• Charge Status
• Remaining Time to Complete Charging
• Battery Voltage / Current
• Battery Temperature
• Present / Highest / Lowest
Battery statistics can be viewed in WebLink
PC
by following these steps:
1. Select Wireless Scanner in the Start menu.
2. From the Advanced Settings menu, go to the Battery tab.
Hint: ALT+A opens the Advanced Settings tab for the selected scanner.
To Next Page
Loading...
