8-2 HS-360X Handheld DPM Scanner User Manual
Introduction
Introduction
If your host does not appear in the
RS-232 Host Parameters table
, refer to the documentation
for the host device to set communication parameters to match the host.
The scanner uses TTL RS-232 signal levels, which interface with most system architectures.
For system architectures requiring RS-232C signal levels, Omron Microscan offers different
cables providing TTL-to-RS-232C conversion. Contact support for more information.
Most computer monitors allow scanning the programming symbols directly on the screen.
When scanning from the screen, be sure to set the document magnification to a level
where you can see the programming symbol clearly, and bars and/or spaces are not merging.
To Next Page
Loading...
