HS-360X Handheld DPM Scanner User Manual 4-9
Radio Communications
Bluetooth-Friendly Name
Parameter # 607
You can set a meaningful name for the scanner that appears in the application during device
discovery. The default name is the scanner name followed by its serial number, e.g., HS-360X
123456789ABCDEF. Scanning Set Defaults reverts the scanner to this name; use custom
defaults to maintain the user-programmed name through a Set Defaults operation.
To set a new Bluetooth Friendly Name, scan the following programming symbol, then scan
up to 23 characters from Appendix G — Alphanumeric Keyboard.
Bluetooth Friendly Name
To Next Page
Loading...
