HS-360X Handheld DPM Scanner User Manual 4-51
Radio Communications
Page Button
Parameter # 746
The cradle offers a page button. The page button is a sensor that when touched, causes
paired scanners to emit a beeping sequence. The default is Enable Page Button.
1. Place your finger over the page button sensor.
2. Press down for approximately 1 second.
3. The cradle LED will turn blue when the scanner is out of the cradle. The paired scanner
will beep, blink, and vibrate. If multiple scanners are paired to the cradle, all the scanners
will beep, blink, and vibrate.
4. Repeat as necessary.
Scanners out of radio range will not beep when paged.
Scan one of the following programming symbols to enable or disable this feature.
Disable Page Button
(0)
* Enable Page Button
(1)
To Next Page
Loading...
