5-4 HS-360X Handheld DPM Scanner User Manual
User Preferences Parameter Defaults
Timeout Between Decodes, Same Symbol 137 0.5 Seconds
Timeout Between Decodes, Different Symbols 144 0.1 Seconds
Mobile Phone/Display Mode 716 Normal
PDF Prioritization 719 Disable
PDF Prioritization Timeout 720 200 msec
Presentation Mode Field of View 609 Full
Decoding Illumination 298 Enable
Motion Tolerance (Handheld Trigger Mode Only) 858 Less Motion Tolerance
Ranging Light Immunity 1722 60Hz Immunity
Battery Threshold
Battery Status High Threshold
Battery Status Medium Threshold
Battery Status Low Warning Threshold
Battery Health Low Warning Threshold
1367
1368
1369
1370
50%
20%
10%
60%
Add an Enter Key N/A N/A
Transmit Code ID Character 45 None
Prefix Value 99, 105 7013 <CR><LF>
Suffix 1 Value
Suffix 2 Value
98, 104
100, 106
7013 <CR><LF>
Scan Data Transmission Format 235 Data as is
FN1 Substitution Values 103, 109 7013 <CR><LF>
Transmit “No Read” Message 94 Disable
Unsolicited Heartbeat Interval 1118 Disable
UID 740 Disable
UID Error Mode Options 742 UID Error Beep
Decoder Effort Level 1438 Level 3
DPM Illumination Control 429 Cycle Illumination
Parameter
Parameter
Number
1
Default
1. Parameter number decimal values are used for programming via RSM commands.
To Next Page
Loading...
