HS-360X Handheld DPM Scanner User Manual 9-57
Symbologies
Code 39 Security Level
Parameter # 750
The scanner offers four levels of decode security for Code 39 barcodes. There is an
inverse relationship between security and scanner aggressiveness. Increasing the level of
security can reduce scanning aggressiveness, so select only the level of security necessary.
• Code 39 Security Level 0: This setting allows the scanner to operate in its most
aggressive state, while providing sufficient security in decoding most in-spec barcodes.
• Code 39 Security Level 1: This default setting eliminates most misdecodes.
• Code 39 Security Level 2: Select this option with greater barcode security requirements
if Security Level 1 fails to eliminate misdecodes.
• Code 39 Security Level 3: If you selected Security Level 2, and misdecodes still
occur, select this security level to apply the highest safety requirements.
Selecting this option is an extreme measure against mis-decoding severely out-of-spec
barcodes. Selecting this level of security significantly impairs the decoding ability of the
scanner. If this level of security is required, try to improve the quality of the barcodes.
Code 39 Security Level 0
(0)
* Code 39 Security Level 1
(1)
Code 39 Security Level 2
(2)
To Next Page
Loading...
