HS-360X Handheld DPM Scanner User Manual 1-11
Quick Start
Four-Slot Spare Battery Charger
The battery charger can accomodate up to four single spare batteries. The charger can sit
on a desktop or be mounted on a wall. This document provides basic instructions for charger
set up and use.
For best performance, fully charge the device battery before using the device for the first
time. To charge the
device battery, insert the battery in the cradle. The battery begins charging when the LED
indicator on the battery charger starts flashing amber. A complete charge of a fully discharged
battery can take up to five hours. Charge within the recommended temperature of 32° to
104° F (0° C to 40° C) nominal, 41° to 95° F (5° to 35° C) ideal.
Battery Charging LED (four)
Battery
Well
(four)
Power Cable
Groove
Wall Mount
Key-Hole (two)
Rubber Feet (four)
Power Port
Cable Groove(s)
Power
Cable Well
USB Port
Four-Slot Spare
Battery Charger
To Next Page
Loading...
