Omron HS-360X - Page 149

HS-360X Handheld DPM Scanner User Manual 5-41
User Preferences and Miscellaneous Options
Prefix/Suffix Values
Key Category Parameter # P = 99, S1 = 98, S2 = 100
Decimal Value Parameter # P = 105, S1 = 104, S2 = 106
You can append a prefix and/or one or two suffixes to scan data for use in data editing. To
set a value for a prefix or suffix, scan a four-digit number (i.e., four programming symbols
from Appendix H — Numeric Keyboard) that corresponds to that value. See
Appendix I — ASCII Character Sets for the four-digit codes.
When using host commands to set the prefix or suffix, set the key category parameter to 1,
then set the 3-digit decimal value. See Appendix I — ASCII Character Sets for the
four-digit codes.
The default prefix and suffix value is 7013 <CR><LF> (the Enter key).
Scan Prefix
(7)
Scan Suffix 1
(6)
Scan Suffix 2
(8)