8-8 HS-360X Handheld DPM Scanner User Manual
RS-232 Parameter Defaults
Parity
A parity check bit is the most significant bit of each ASCII coded character. Select the
parity type according to host device requirements.
• Select Odd parity to set the parity bit value to 0 or 1, based on data, to ensur
e that the
cod
ed character contains an odd number of 1 bits.
• Select Even parity to set the parity bit value is set to 0 or 1, based on data, to ensure
that the coded character contains an even number of 1 bits.
• Select None when no parity bit is required.
Odd
Even
* None
To Next Page
Loading...
