HS-360X Handheld DPM Scanner User Manual 9-15
Symbologies
Decode UPC/EAN/JAN Supplementals
Parameter # 16
Supplementals are appended according to specific format conventions (e.g., UPC A+2,
UPC E+2, EAN 13+2). The following options are available:
• If you select Ignore UPC/EAN with Supplementals, and the scanner is presented
with a UPC/EAN plus supplemental symbol, the scanner decodes UPC/EAN and
ignores the supplemental characters.
•
If you select
Decode UPC/EAN with Supplementals
, the scanner only decodes UPC/EAN
symbols with supplemental characters, and ignores symbols without supplementals.
• If you select Autodiscriminate UPC/EAN Supplementals, the scanner decodes
UPC/EAN symbols with supplemental characters immediately. If the symbol does not
have a supplemental, the scanner must decode the barcode the number of times set via
UPC/EAN/JAN Supplemental Redundancy before transmitting its data to confirm that
there is no supplemental.
• If you select one of the following
Supplemental Mode
options, the scanner immediately
transmits EAN-13 barcodes starting with that prefix that have supplemental characters. If
the symbol does not have a supplemental, the scanner must decode the barcode the
number
of times set via
UPC/EAN/JAN Supplemental Redundancy
before transmitting
its data to confirm that there is no supplemental. The scanner transmits UPC/EAN barcodes
that do not have that prefix immediately.
• Enable 378/379 Supplemental Mode
• Enable 978/979 Supplemental Mode
• Enable 977 Supplemental Mode
• Enable 414/419/434/439 Supplemental Mode
• Enable 491 Supplemental Mode
• Enable Smart Supplemental Mode - applies to EAN-13 barcodes starting with any
prefix listed previously.
• Supplemental User-Programmable Type 1 applies to EAN-13 barcodes starting
with a 3-digit user-defined prefix. Set this 3-digit prefix using User-Programmable
Supplementals.
• Supplemental User-Programmable Type 1 and 2 applies to EAN-13 barcodes
starting with either of two 3-digit user-defined prefixes. Set the 3-digit prefixes using
User-Programmable Supplementals.
• Smart Supplemental Plus User-Programmable 1
applies to EAN-13 barcodes starting
with any prefix listed previously or the user-defined prefix set using
User-Programmable
Supplementals
.
• Smart Supplemental Plus User-Programmable 1 and 2 applies to EAN-13
barcodes starting with any prefix listed previously or one of the two user-defined
prefixes set using User-Programmable Supplementals.
Note: To minimize the risk of invalid data transmission, select either to decode or
ignore supplemental characters.
To Next Page
Loading...
